Press Release

RedTail delivers LiDAR System to DoD’s Explosive Ordnance Disposal Community

RedTail LiDAR Systems has delivered six LiDAR systems to the 707th Ordnance Company stationed at Joint Base Lewis-McChord.  These systems will provide Explosive Ordnance Disposal (EOD) technicians an opportunity to assess how LiDAR can be used to enhance their operations. 

The RedTail LiDAR Systems RTL-450 was integrated onto the Teledyne FLIR SkyRaider Unmanned Aerial System (UAS) to address a broad range of the EOD community’s 3D mapping needs. Captain William R. Hartman, the commander of the 707th EOD Company, stated that the highlight of the testing was using the LiDAR system to map terrain.  In addition to terrain mapping, the RTL-450 can be used to calculate crater volumes from improvised explosive device (IED) blasts, perform route planning for unmanned ground vehicles, aid in mission planning, and conduct surveillance. The 3D maps generated – commonly referred to as point clouds – allow operating areas to be viewed from any perspective using the rotation and zoom capabilities provided within the viewer software. 

The underlying LiDAR technology used in the RTL-450 was licensed from the Army Research Laboratory (ARL).  The MEMS mirror-based design provides enhanced 3D imagery due to the fact that the laser pulses are steered to the ground in a very well-defined and controlled scan pattern. The LiDAR technology is ideal for applications where Artificial Intelligence and Machine Learning (AI/ML) algorithms can be used for target detection and classification due to the high point density of the point clouds. 

The system can operate in either a raster scan mode for surveillance missions or a side-to-side line scan mode for area mapping while the UAS is flying. The intuitive command and control, high-brightness display integrated into the ground control station (GCS), and real-time 3D map generation allows operators to begin mission planning and analysis even before the mapping or surveillance missions are completed. 

Back to top button